Best AI Models for the RTX 5060 Ti 16GB
Every model a 16GB card holds, on the narrowest bus of any 16GB card on this hub: the coding picks, the 8GB variant that shares the name, and what a second card does and does not add. Footprints from Ollama’s tag sizes, speeds as bandwidth ceilings.
The best AI model for the RTX 5060 Ti 16GB is Qwen 3 14B — 9.3GB at Q4_K_M as Ollama lists it, ~6–7GB of the 16GB left for context, and a bandwidth ceiling of ~48 tok/s (NVIDIA’s 448 GB/s ÷ 9.3GB — a ceiling, not a measurement). The 16GB buys the same list an RTX 5070 Ti or 5080 runs: Qwen 2.5 Coder 14B (9.0GB) as the coding daily driver, Devstral Small 2 24B (15GB) as the strongest agentic coder that fits, gpt-oss:20b (14GB, MoE) as the fast assistant and Gemma 4 12B at Q8 (13GB). What it does not buy is bandwidth: the 128-bit bus gives every dense row exactly half the ceiling of a 5070 Ti (448 vs 896 GB/s). And read the box — the RTX 5060 Ti also ships with 8GB, which cannot hold anything on this list above 8GB. We do not own a 5060 Ti; nothing here is a measured rate.
Models that run well on the RTX 5060 Ti 16GB
| Model | Size | Build | Memory used | Ceiling tok/s* |
|---|---|---|---|---|
| WINNERQwen 3 14B The 16GB winner: the whole 14B class with ~6–7GB of KV budget, room for a long chat or a large document without spilling. Its q8_0 tag is 16GB, the entire card. ollama pull qwen3:14b | 14B (dense) | Q4_K_M | ~9.3GB | ceiling ~48 tok/s (448 ÷ 9.3GB) |
| Qwen 2.5 Coder 14B The everyday answer to “best Ollama coding model for a 5060 Ti 16GB”: ~7GB of context budget lets an editor agent see whole files, which matters more on a slow-bus card than a slightly stronger model would. ollama pull qwen2.5-coder:14b | 14B (dense) | Q4_K_M | ~9.0GB | ceiling ~50 tok/s (448 ÷ 9.0GB) |
| Devstral Small 2 24B The strongest agentic coder that fits 16GB, with about a gigabyte left for KV cache. On this bus its ceiling is half a 5070 Ti’s, so it suits agent runs you walk away from more than inline completion. ollama pull devstral-small-2:24b | 24B (dense) | Q4_K_M | ~15GB | ceiling ~30 tok/s (448 ÷ 15GB) |
| gpt-oss:20b OpenAI’s open-weight model, sized for 16GB. Only ~3.6B parameters are read per token, far fewer bytes than any dense row here, which is why MoE models suit a narrow bus. It fills most of the card, so run it alone. ollama pull gpt-oss:20b | 20.9B (MoE, ~3.6B active) | MXFP4 | ~14GB | MoE — ~3.6B active per token; bandwidth is not the limit; not measured |
| Gemma 4 12B The near-lossless lane no 12GB card has: Google’s dense 12B at Q8 with image input. Against the 8.0GB q4_K_M build it costs about 40% of the ceiling (~34 vs ~56), so choose it for quality, not speed. ollama pull gemma4:12b-it-q8_0 | 12B (dense) | Q8_0 | ~13GB | ceiling ~34 tok/s (448 ÷ 13GB) |
| Flux.1 dev FP8 Blackwell has native FP8 tensor cores, so the FP8 build is both the fit and the fast path, and 16GB leaves room for a couple of LoRAs. It needs a PyTorch build with Blackwell (sm_120) kernels; see the notes. ComfyUI: flux1-dev-fp8.safetensors | 12B | FP8 | ~11GB (~13GB with LoRAs) | diffusion — compute-bound, not timed |
* Ceiling tok/s = the device’s vendor-listed memory bandwidth ÷ the model’s file size as Ollama lists it — the rate a dense model cannot exceed, because every generated token reads the whole weight set once. We have not measured this hardware. Real-world generation usually lands at 50–80% of the ceiling and falls as the context grows; mixture-of-experts rows read only their active parameters, so no ceiling is quoted for them, and image models are compute-bound, so no render time is.
What won't fit on the RTX 5060 Ti 16GB
- ✗Qwen3.6 27B (needs 17GB at Q4_K_M) — A gigabyte over before any context. One card cannot hold it; two 16GB cards can (see the FAQ).
- ✗Qwen3-Coder 30B (needs 19GB at Q4_K_M) — The fast MoE coder people ask about for this card. It does not fit 16GB at Q4; Devstral Small 2 (15GB) is the coding ceiling.
- ✗Qwen 2.5 Coder 32B (needs 20GB) — The dense 32B coder is a 24GB-card model, or a two-card one.
- ✗This page’s list, on the 8GB card (needs the 16GB variant) — The RTX 5060 Ti 8GB has the same chip and bus with half the memory. No 14B fits it (9.0–9.3GB at Q4), and gpt-oss:20b, Devstral and the Q8 rows are gone; it is a 7–9B-class card.
RTX 5060 Ti 16GB-specific notes
- →Where this page’s numbers come from: we do not own a 5060 Ti. Footprints are the file sizes Ollama prints on each tag page (read 20 Nov 2026), and every tok/s is a ceiling — NVIDIA’s listed 448 GB/s divided by the gigabytes a dense model reads per token. Real engines land below it and slow as the context fills. We quote no measured rate.
- →The 16GB/8GB trap is the first thing to check. NVIDIA sells the RTX 5060 Ti in two memory sizes on the same 128-bit, 448 GB/s configuration, launched at $429 (16GB) and $379 (8GB). The 8GB card is an 8GB-tier machine: no 14B model fits it, let alone gpt-oss:20b or Devstral. Listings often lead with “RTX 5060 Ti” and bury the memory size, so confirm 16GB before you pay.
- →Bandwidth, in context: 448 GB/s is the lowest of the 16GB cards on this hub, below the Arc A770 (560), RX 9070 XT (640), RTX 5070 Ti (896) and RTX 5080 (960). Fit is identical across all five; the ceiling is not, and on the dense rows this card’s is exactly half a 5070 Ti’s. Whether that matters depends on use: at ~48 tok/s of ceiling on a 14B, chat stays well past reading speed even at a fraction of it, while long agent loops on a 24B are where you feel the bus.
- →No laptop shares this name. NVIDIA’s laptop comparison lists no RTX 5060 Ti Laptop GPU; the laptop chip called RTX 5060 has 8 GB of GDDR7 on a 128-bit bus, 3,328 CUDA cores and a 45–100 W range. A “5060” laptop is an 8GB machine, and none of this page’s rows above 8GB apply to it.
- →Two cards: Ollama’s FAQ says a model that does not fit on one GPU is spread across all of them, so a pair of 16GB cards (32GB) holds Qwen3.6 27B (17GB at Q4) or Qwen 2.5 Coder 32B (20GB) with context to spare. What a second card does not add is decode speed for a single conversation: each token still reads every weight once, part from each card in turn, so a 17GB model’s ceiling stays near 448 ÷ 17 ≈ 26 tok/s. Two 5060 Ti cards buy capacity, not bandwidth.
- →Power, from NVIDIA’s spec table: 180 W total graphics power, a 600 W required system power supply, and either one PCIe 8-pin cable or a 300 W or greater PCIe Gen 5 cable (adapter in the box). That is the lightest install of any 16GB card on this hub; a pair is 360 W of graphics power on paper. Decode is a sustained load, so size the supply for minutes at full draw, not gaming bursts.
- →The Blackwell software trap: the 5060 Ti reports compute capability 12.0 (sm_120) like every RTX 50-series card, and PyTorch wheels built for CUDA 12.6 or older have no kernels for it, so old pinned projects fail with “no kernel image is available for execution on this device”. Ollama ships its own CUDA runtime and lists the 5060 Ti in its compute-capability 12.0 row; ComfyUI and Python projects with compiled extensions are where it bites.
- →Price on 20 Nov 2026, against the $429 launch price: the three 16GB listings in resaleprices.com’s eBay feed that day asked $850–880. The tracker’s own average ($683, 124 listings) pools 8GB and 16GB cards, so it understates the 16GB price, and videocardprices.com’s tracker follows an 8GB model ($664.98 new at Amazon the same day). At roughly double the launch price, compare a used RX 9070 XT (resaleprices.com average $889 the same day): the same 16GB list at 640 GB/s, 43% more bandwidth, without CUDA.
Quick start
curl -fsSL https://ollama.com/install.sh | shollama run qwen3:14bollama run qwen2.5-coder:14bollama psGo from "it runs" to actually building
All 561 chapters — running local models, RAG, agents, fine-tuning — plus the Python Lab and every course added later.
Frequently asked questions
What is the best AI model for an RTX 5060 Ti 16GB?
Qwen 3 14B at Q4_K_M — 9.3GB as Ollama lists it, ~6–7GB of the card left for context, and a bandwidth ceiling of ~48 tok/s (448 ÷ 9.3GB). For code, Qwen 2.5 Coder 14B (9.0GB); for agentic coding, Devstral Small 2 24B (15GB); for a fast general assistant, gpt-oss:20b (14GB); for near-lossless quality, Gemma 4 12B at Q8 (13GB); for images, Flux.1 dev FP8. All footprints are tag sizes and all speeds are ceilings.
What is the best Ollama coding model for a 5060 Ti 16GB?
Two answers, depending on how you work. For editor assistance and questions about a repo, Qwen 2.5 Coder 14B (ollama pull qwen2.5-coder:14b, 9.0GB): it leaves ~7GB for context, which is what lets a tool see whole files, and its ceiling here is ~50 tok/s. For agent runs where answer quality matters more than context, Devstral Small 2 24B (15GB), the strongest coder that fits, with about a gigabyte of KV room and a ~30 tok/s ceiling. Qwen3-Coder 30B (19GB) and Qwen 2.5 Coder 32B (20GB) do not fit one 16GB card at Q4.
RTX 5060 Ti 16GB vs 8GB for local AI — does it matter?
It decides everything. Both versions have the same 128-bit bus and 448 GB/s, so speed is identical on anything that fits; the 8GB card simply fits far less. It cannot hold a 14B model at Q4 (9.0–9.3GB), gpt-oss:20b (14GB) or any 24B coder, which puts it in the 7–9B class alongside an RTX 4060. For AI, only the 16GB card is worth buying, and the launch-price gap was $50 ($429 vs $379).
Are two RTX 5060 Ti 16GB cards a good local LLM setup?
For capacity, yes; for speed, no. Ollama spreads a model across both cards when it does not fit on one, so 32GB holds Qwen3.6 27B at Q4 (17GB) and the 32B coders (20GB), models no single 16GB card can run. But each token still reads every weight once, part from each card in turn, so the decode ceiling for a 17GB model stays near 448 ÷ 17 ≈ 26 tok/s. Before buying a pair, price a single used 24GB card (our RTX 3090 page carries a dated band): it holds the same 27–32B models with roughly twice the bandwidth.
How many tokens per second does an RTX 5060 Ti 16GB get?
We have not measured one. The ceiling is arithmetic: NVIDIA lists 448 GB/s, and a dense model reads its weights once per token, so a 9.3GB model cannot exceed ~48 tok/s and a 15GB one ~30. Real engines land below that and slow down as the context grows. A 5060 Ti figure that does not name the engine, model file, quantization and context length is hard to compare with anything.
Related guides
Other GPUs
Ready to Go Beyond Tutorials?
25 structured courses with hands-on chapters - build RAG chatbots, AI agents, and ML pipelines on your own hardware.
Was this helpful?